Configuring Line Crossing Detection - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome
surveillance center, send email, trigger channel, smart tracking and trigger alarm output are
selectable. Please refer to Step 3 in Section 6.6.1 Configuring Motion Detection.
8. Click

6.6.9 Configuring Line Crossing Detection

The virtual plane detection can be adopted for the intrusion detection. Once the virtual plane is
detected being traversed according to the configured direction, a set of alarm action is triggered.
Steps:
1. Enter the Line Crossing Detection interface:
Configuration > Advanced Configuration > Events > Line Crossing Detection
2. Check the Line Crossing Detection checkbox.
3. Select the Line in dropdown list to configure.
4. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the line crossing detection interface. Optionally, you can click the
button to manually activate the movement, or lock the movement when the button turns to
by clicking it.
5. Draw area.
1) Click
2) Click the line to switch to the editing mode.
© Hikvision
to save the settings.
Figure 6-53 Configuring Line
to draw a line on the image.
67