Recording And Capturing Pictures Manually; Operating Ptz Control; Ptz Control Panel - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome
2. Operate the 3D positioning function:

Left click a position of the live video. The corresponding position will be moved to the
center of the live video.
Hold down the

the live video.
The corresponding position will be moved to the center of the live video
and zoomed in.
Hold down the

the live video.
The corresponding position will be moved to the center of the live video
and zoomed out.
Please refer to the following sections for more information:
 Configuring remote recording in Section 7.2 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 6.1 Configuring Local Parameters and
Section 6.4.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 6.5.2 Configuring OSD Settings.

4.3 Recording and Capturing Pictures Manually

In the live view interface, click
record the live video. The local saving paths of the captured pictures and clips can be set in the
Configuration > Local Configuration interface.
To configure remote automatic recording, please refer to Section 7.2 Configuring Recording
Schedule.
The captured image will be saved as a JPEG file in your computer.

4.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to control panning, tilting and
zooming.

4.4.1 PTZ Control Panel

On the live view page, click
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
© Hikvision
mouse button and drag the mouse to the lower right on
left
mouse button and drag the mouse to the upper left on
left
on the toolbar to capture the live pictures or click
to show the PTZ control panel or click
15
to
to hide it.