Configuring Recording Schedule - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome
(1) Enter the HDD Settings interface (Advanced Configuration > Storage > Storage
Management), in which you can view the capacity, free space, status, type and property
of the disk.
(2) If the status of the disk is Uninitialized as shown in Figure 7-3, check the corresponding
checkbox to select the disk and click
When the initialization completed, the status of disk will become Normal as shown in
Figure 7-5.
Quota:
In Storage Management interface, you can predefine the storage space for storing the pictures
and videos by configuring the Percentage of Picture and Percentage of Record manually.
 Up to 8 NAS disks can be connected to the speed dome.
 To initialize and use the SD card after insert it to the speed dome, please refer to the steps
of NAS disk initialization.

7.2 Configuring Recording Schedule

Purpose:
There are two kinds of recording for the speed domes: manual recording and scheduled recording.
For the manual recording, refer to Section 4.4 Recording and Capturing Pictures Manually. In
this section, you can follow the instructions to configure the scheduled recording. By default, the
record files of scheduled recording are stored in the SD card (if supported) or in the network disk.
Steps:
© Hikvision
Figure 7-3 Initialize Disk
Figure 7-4 Initializing
Figure 7-5 View Disk Status
to start initializing the disk.
70