Setting / Calling A Patrol - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome
Preset No. Function
When you calling preset 45 (one-touch patrol), the speed dome patrols from the
preset 1 to 32. Before you enable this function, please set the preset 1 to 32 first.

4.4.3 Setting / Calling a Patrol

Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.

Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from
3. Click to enter the adding interface of preset as shown in Figure 4-7.
4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
© Hikvision
Figure 4-6 Special Preset
to enter the patrol settings interface.
.
Figure 4-7 Adding Presets
Description
It is the duration staying on one patrol point. The speed dome
moves to another patrol point after the patrol time.
Preset No. Function
108 Fan On By Temperature
Control
18