Drive Train - BOMBARDIER 1999 Traxter Operator's Manual

V01G06Y
1. Remove the two nuts
2. Unplug the connector
Using a small screwdriver, pry cap out
to expose bulb socket.
1
V01I0EY
1. Speedometer
2. Pry cap out
Insert a small screwdriver in socket
slot and turn counterclockwise until
stopped.
Use small long nose pliers to pull bulb
out or carefully pry out using a small
screwdriver.
1
2
2
V01I0DY
1. Pull bulb out
Reinstall new bulb using long nose pli-
ers. Turn bulb socket clockwise to
lock.

Drive Train

Drive Shaft Boot/Protector
Inspection
Visually inspect drive shaft protectors
and boot conditions. Check protectors
for damage or rubbing against shafts.
Check boots for cracks, tears, leaking
grease etc. Repair or replace damaged
parts as necessary.
2
V01L1XY
1. Drive shaft protector
2. Drive shaft boots
1
1
61