Table of Contents
Advertisement
Rotate the bulb socket counterclock-
wise then remove headlamp.
1
V04G03Y
1. Unlock
2. Lock
Properly reinstall removed parts in the
reverse order of their removal.
Adjust beam aiming as follows:
Turn knobs to adjust beam height and
side orientation to your convenience.
Adjust both headlamps evenly.
3
1
V04G02Z
1. Headlamp cover
2. Beam height adjustment
3. Beam side adjustment
Taillight
Unscrew lens screws to expose bulbs.
2
2
_____________________
V07G04Y
1. Lens
2. Screws
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Speedometer
The speedometer is lighted with
LEDs. If one LED burnt, replace the
speedometer. The LEDs are not avail-
able separately.
Drive Train
Drive Shaft Boot/Protector
Inspection
Visually inspect drive shaft protectors
and boots conditions. Check protec-
tors for damage or rubbing against
shafts. Check boots for cracks, tears,
leaking grease etc. Repair or replace
damaged parts as necessary.
2
1
103
Hide quick links:
Advertisement
Table of Contents
