Why Use Auto Re-Arm; Disabling Auto Re-Arm - Omega Engineering OMB-CHARTSCAN 1400 User Manual

Why use Auto Re-arm?

You can use Auto Re-arm as a convenient way to monitor and analyze specific types of trigger events.
For example, if you set Channel 1 going above 30°C as a trigger, you can choose to repeat 100 (or
more) acquisitions with this same trigger criteria (Channel 1 > 30°C). Whether you select to capture
the trigger blocks in one file, or each in a separate file, each of the data acquisitions will occur
automatically; and each will make use of your set configuration.

Disabling Auto Re-arm

To disable Auto Re-arm, simply use Auto Re-arm's default setting of "Capture one trigger block."
When you capture only one trigger block you are, in essence, not making use of the automatic re-arm
feature.
Note: The trigger event, trigger by absolute time, is not suitable for automatic re-arming. In this instance, the
default of "Capture one trigger block" is automatically forced.
ChartScan User's Manual ChartView Software Reference 4-43