Omega Engineering OMB-CHARTSCAN 1400 User Manual page 158

API Commands
EXAMPLES
PRINT#1, "OUTPUT07:F0,0X"
PRINT#1,"OUTPUT07;C1, 1, -100.0,
100.0, 1.0X"
PRINT#1, "OUTPUT07; U4X"
PRINT#1, "ENTERO7"
LINE INPUT #2, A$
PRINT A$
PRINT #1, "OUTPUT07;F1,1X"
PRINT#1,"OUTPUT07;C1, 1, -100.0,
100.0, 1.0X"
PRINT #1, "OUTPUT07;U4X"
PRINT #1, "ENTER07"
LINE INPUT #2, A$
PRINT A$
A-32
' Set the engineering units to °C and reading format to
engineering units
' Set points and hysteresis interpreted as °C
' Retrieve High/Low/Last readings
' Returned readings are in engineering °C format
' Set the engineering units to °F and reading format to
binary low/high
' Set points and hysteresis interpreted as °F
' Retrieve High/Low/Last readings
' Returned readings in binary low/high format
Appendix A
ChartScan User's Manual