Omega Engineering OMB-CHARTSCAN 1400 User Manual page 145

Appendix A
TYPE
EXECUTION
SYNTAX
DESCRIPTION
With the Power-Up Settings (
configuration when it is powered on or when the Power-On Reset (
configuration will be exactly the same as the configuration it had when it was last powered down or a
command issued. Specifying this mode will insure that the unit will always come up with the configuration which
has most recently been defined. Using this mode is convenient if it is undesirable to reconfigure the unit every
time it is powered up or a
Specifying the mode to be
when a
command. The factory defaults settings are defined in the Configuring Power-Up State section of Appendix C.
Note: Issuing the Power-Up Default Settings (
EXAMPLE
PRINT#1,"OUTPUT07;Q?T?Y?X"
PRINT#1,"ENTER07"
INPUT A$
PRINT#1,"OUTPUT07;*S1X"
PRINT#1, "OUTPUT07;*RX"
SLEEP 5
PRINT#1,"OUTPUT07;Q?T?Y?X"
PRINT#1,"ENTER07"
INPUT A$
ChartScan User's Manual
*S
System
Immediate
Specify power-up configuration mode. Valid options for
*Smode
) command, specifying the mode to be
*S
command is issued.
*R
will cause the unit to load the factory default configuration when it is powered on or
1
command is issued. Using this mode is the same as power-cycling the unit then issuing the
*R
command will cause any previously defined configuration to be irrevocably lost. The calibration factors for
the unit and its slaves, however, will remain intact.
- Power-Up Settings
up under last known configuration (default).
default configuration.
*R
) command and then power-cycling the unit, or issuing the
*S1
' Retrieve some current configuration settings
' Get the settings
' Screen shows
001000,000000
' Configure to power up with factory defaults
' Reset the unit
' Wait for the unit to reset
' Retrieve some current configuration settings
' Get the settings
' Screen shows
000000,000000
mode
- Power up under factory
1
will cause the unit to load its last known
0
) command is issued. The last known
Q1,7,7,7,0 T1,3,0,0 Y000100,
Q1,0,0,0,0 T0,0,0,0 Y000000,
API Commands
are: - Power
0
*R
*F
*R
A-19