Bar Graph Meters - Omega Engineering OMB-CHARTSCAN 1400 User Manual

Bar Graph Meters

Selecting Bar Graph Meters from ChartView's Window pull-down menu brings up the Bar Graph
window. This window displays several channels in bar graph format. To activate the display, select
the Start button from the toolbar. At least one meter must be assigned to an active (On) channel. You
can select to view up to 32 meters at a given time.
Note 1: Double-clicking the left mouse button in a meters scale area brings up a channel selection pop-up
menu. A single click with the right mouse button in this same area brings up a configuration pop-up
menu (item H). Both of these pop-up menus are discussed in the section, Meters Configuration Menu.
The items in this window are as follows:
A - Start
B - Stop
These items are discussed in more detail, following the description of Digital Meters.
Configuration Note:
For Bar Graph Meters, configure the meter settings by first clicking the right mouse button
anywhere within the meter display area. A pop-up menu will appear allowing you to reconfigure
the meter in regard to scale, limits, channel selection, adding peak hold indicators, etc. Refer to the
section entitled Meters Configuration Menu for more detail.
4-28 ChartView Software Reference
Bargraph Meters, Shown with 3 Meters Selected for Viewing
C - Reset Peak Hold E - Print
D - Stay On Top F - Rows x Columns
G - Number of Meters
H - Configuration Pop-Up Menu
.... for Bar Graph Meters
ChartScan User's Manual