Telnet Command: Wan Wimax - Draytek Vigor2925 Series User Manual

init2[string]
dial [string]
pin [string]
paponly [on/off]
backup_wait [value]
pipe [string]
wakeup on
wakeup off
wakeup [value]
status
E x a m p l e
E x a m p l e
wan modem pipe 0x81 0x82 0x01
>
Force 3G USB Int/Din/Dout Pipe 0x81 0x82 0x1
> wan modem wakeup on
turn on wakeup by telnet mode, usb will reset now
wakeup string should be 31 bytes
> wan modem wakeup off
turn off wakeup by telnet mode, usb will reset now
wakeup string should be 31 bytes
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to enable or disable WAN 3G/4G DHCP mode for Vigor router.
wan wimax [on/off]
S y n t a x D e
S y n t a x D e
Parameter
On
It means to set initial2 modem AT command.
string: type text.
It means to set dial modem AT command.
string: type the command (default: ATDT*99#).
It means to set PIN code (0: disable) on SIM card.
If "0" is typed, it means disable the function.
string: type the PIN code (4 digits) in this field.
Force PPP authentication PAP only (on/off).
Set the wait time (1-255 sec) for rebooting the router when
work in backup mode.
Force 3G Modem pipe to be Int/Din/Dout (ex: 0x81 0x82
0x02).
Int: It means USB interrupt pipe.
Din: It means USB data input pipe.
Dout: It means USB data output pipe.
It means to wake up the modem by telnet.
It means to wake up the modem by Vigor router.
It means the commands used to wakup modem. The format
shall be heximal digits.
vid: Set device VID belong to this interface (for multiple
device)
pid: Set device PID belong to this interface (for multiple
device)
It means to display current information of WAN status.
: w a n w i m a x
: w a n w i m a x
s c r i p t i o n
s c r i p t i o n
Description
It means to enable WAN 3G/4G DHCP mode.
665
Vigor2925 Series User's Guide