Draytek Vigor2925 Series User Manual page 339

Dual-wan security router

Hide thumbs Also See for Vigor2925 Series:

Table of Contents

For adding a new rule, click Add to open the following page.

Available settings are explained as follows:

Acceleration

Ethernet Type

Local Address

Remote Address

DiffServ CodePoint

Check this box to invoke these settings.

Check this box to enable the hardware acceleration when

such rule is applied.

Please specify which protocol (IPv4 or IPv6) will be used

for this rule.

Click the Edit button to set the local IP address (on LAN)

for the rule.

Click the Edit button to set the remote IP address (on

LAN/WAN) for the rule.

Address Type – Determine the address type for the source

For Single Address, you have to fill in Start IP address.

For Range Address, you have to fill in Start IP address and

End IP address.

For Subnet Address, you have to fill in Start IP address

and Subnet Mask.

All the packets of data will be divided with different levels

and will be processed according to the level type by the

system. Please assign one of the levels of the data for

processing with QoS control.

Vigor2925 Series User's Guide