Draytek Vigor2925 Series User Manual page 193

D e t a i l s P a g e f o r I P
D e t a i l s P a g e f o r I P
This type allows you to setup 6in4 Static Tunnel for WAN interface.
Such mode allows the router to access IPv6 network through IPv4 network.
However, 6in4 offers a prefix outside of 2002::0/16. So, you can use a fixed endpoint rather
than anycast endpoint. The mode has more reliability.
Available settings are explained as follows:
Item
Remote Endpoint IPv4
Address
6in4 IPv6 Address
LAN Routed Prefix
Tunnel TTL
WAN Connection
Detection
v 6 – 6 i n 4 S t a t i c T u
v 6 – 6 i n 4 S t a t i c T u
Description
Type the static IPv4 address for the remote server.
Type the static IPv6 address for IPv4 tunnel with the value
for prefix length.
Type the static IPv6 address for LAN routing with the value
for prefix length.
Type the number for the data lifetime in tunnel.
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Ping Detect or Always On for the system
to execute for WAN detection.
Always On - The network based on IPv6 will be kept
connected.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address or hostname for pinging.

Ping IP/Hostname – Type the IP address/host name in
such field.

TTL (Time to Live) – Displays value for your
reference. TTL value is set by telnet command.
177
n n e l i n W A N 1 / W A
n n e l i n W A N 1 / W A
Vigor2925 Series User's Guide
N 2
N 2