Telnet Command: Port; Telnet Command: Portmaptime - Draytek Vigor2925 Series User Manual

T e l n e t C o m m
T e l n e t C o m m
This command allows users to check the connection speed used by each port.
port status
S y n t a x
S y n t a x
Parameter
status
E x a m p
E x a m p
> port status
% port 1 : link DOWN, speed= ---- Mbps, duplex= ----, FlowControl= --
% port 2 : link DOWN, speed= ---- Mbps, duplex= ----, FlowControl= --
% port 3 : link UP , speed= 100 Mbps, duplex= FULL, FlowControl= OFF
% port 4 : link DOWN, speed= ---- Mbps, duplex= ----, FlowControl= --
% WAN1
T e l n e t C o m m
T e l n e t C o m m
This command allows you to set a time of keeping the session connection for specified
protocol.
portmaptime [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
[<command>
<parameter>|...]
-t <sec>
-u <sec>
-i <sec>
-w <sec>
-s <sec>
-f
-l <List>
Vigor2925 Series User's Guide
a n d : p o r t
a n d : p o r t
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to view the Ethernet port status.
l e
l e
: link DOWN, speed= ---- Mbps, duplex= ----, FlowControl= --
a n d : p o r t m a p t i m
a n d : p o r t m a p t i m
D e s c r i p t i o n
D e s c r i p t i o n
e
e
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one
line.
It means "TCP" protocol.
<sec>: Type a number to set the TCP session timeout.
It means "UDP" protocol.
<sec>: Type a number to set the UDP session timeout.
It means "IGMP" protocol.
<sec>: Type a number to set the IGMP session timeout.
It means "TCP WWW" protocol.
<sec>: Type a number to set the TCP WWW session
timeout.
It means "TCP SYN" protocol.
<sec>: Type a number to set the TCP SYN session timeout.
It means to flush all portmaps (useful for diagnostics).
List all settings.
602