Draytek Vigor2925 Series User Manual page 25

Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB1~USB2
WAN1~WAN2
LAN1~LAN5
Phone 1/2
Line
PWR
ON/OFF
Description
Press the button and release it within 2 seconds. When the wireless
function is ready, the green LED will be on.
Press the button and release it within 2 seconds to turn off the
WLAN function. When the wireless function is not ready, the LED
will be off.
When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client's device making
network connection through WPS.
Restore the default settings. Usage: Turn on the router (ACT LED
is blinking). Press the hole and keep for more than 5 seconds. When
you see the ACT LED begins to blink rapidly than usual, release the
button. Then the router will restart with the factory default
configuration.
Connecter for a USB device (for 3G/4G USB Modem or printer).
Connecter for local network devices or modem for accessing
Internet.
Connecters for local network devices.
Connecter for analog phone(s).
Connector for PSTN life line.
Connecter for a power adapter.
Power Switch.
9
Vigor2925 Series User's Guide