Draytek Vigor2925 Series User Manual page 210

D e t a i l s
D e t a i l s
There are two configuration pages for LAN1, Ethernet TCP/IP and DHCP Setup (based on
IPv4) and IPv6 Setup. Click the tab for each type and refer to the following explanations for
detailed information. Below shows the settings page for IPv6.
It provides 2 daemons for LAN side IPv6 address configuration. One is Router
Advertisement Server (stateless) and the other is DHCPv6 Server (Stateful).
Available settings are explained as follows:
Item
WAN Primary Interface
Static IPv6 Address
Unique Local Address
Vigor2925 Series User's Guide
P a g e f o r L A N 1 ~ L A
P a g e f o r L A N 1 ~ L A
Description
Choose a WAN interface that IPv6 prefix comes from.
IPv6 Address –Type static IPv6 address for LAN.
Prefix Length – Type the fixed value for prefix length.
Add – Click it to add a new entry.
Delete – Click it to remove an existed entry.
Such feature is used for the host without assigned IPv6
N 5 a n d D M Z P o r t
N 5 a n d D M Z P o r t
194
– I P v 6 S e t u p
– I P v 6 S e t u p