Draytek Vigor2925 Series User Manual page 641

-c
-e
-p
-t
-P
-i
-d
-v
E x a m p l e
E x a m p l e
> srv nat trigger 1 -c test -e 1 -p 1 -t 500 -P 1 -i 1000
> srv nat trigger -v
%% Port Trigger Rule status:
Index Status Comment TProto TPort
-----------------------------------------------------
1 Enable test
2 Disable
3 Disable
4 Disable
5 Disable
6 Disable
7 Disable
8 Disable
9 Disable
10 Disable
11 Disable
12 Disable
13 Disable
14 Disable
15 Disable
16 Disable
17 Disable
18 Disable
19 Disable
20 Disable
line.
It means to type a brief description for the setting profile.
It means to enable/disable the specified profile.
1: Enable
0: Disable
It means to set the the protocol for the profile.
1: TCP
2: UDP
3: All
It means to set triggering port.
It means to set the protocol for incomming packets.
1:TCP
2:UDP
3:All
It means to set the protocol for incomming port.
The range is from 0 to 65535.
It means to delete the specified profile.
It means to display port trigger setting.
TCP 500 TCP
625
IProto IPort
1000
Vigor2925 Series User's Guide