Draytek Vigor2925 Series User Manual page 567

ip igmp_snoop disable
ip igmp_snoop status
ip igmp_snoop table
ip igmp_snoop txquery
ip igmp_snoop mode
ip igmp_snoop chkleave
ip igmp_snoop separate
ip igmp_snoop portchk
S y n t a x D e s c r i p t i o
S y n t a x D e s c r i p t i o
Parameter
enable
disable
status
table
txquery
mode
chkleave
separate
portchk
E x a m p l e
E x a m p l e
> ip igmp_snoop enable
%% ip igmp snooping [enable|disable|status], IGMP Snooping is Enabled.
> ip igmp_snoop disable
%% ip igmp snooping [enable|disable|status], IGMP Snooping is Disabled.
> ip igmp_snoop mode hw
igmp snooping works on SW mode now.
> ip igmp_snoop mode ?
% ip igmp mode [hw/sw]
igmp snooping works on HW mode now.
> ip igmp_snoop separate ?
% ip igmp separate [on/off]
igmp snoop seprate is ON now.
igmp packets will be separated by NAT/Bridge.
n
n
Description
It means to enable igmp snoop function
It means to disable igmp snoop function.
It means to display current igmp configuration.
It means to display current configuration of igmp.
It means to send out IGMP QUERY to LAN periodically.
It means to set software or hardware mode for snooping
working on.
It means to check the leave status.
On: enable the IGMP snoop leave checking function.
Off: it will drop LEAVE if still clients on the same group.
It means to set IGMP packets being separated by
NAT/Bridge.
On: The packets will be separated.
Off: The packets will not be separated by NAT/Bridge.
It means to perform LAN port checking for IGMP packets.
On: Perform the LAN port checking.
Off: No perform the LAN port checking.
551
Vigor2925 Series User's Guide