Draytek Vigor2925 Series User Manual page 670

oname
opwd
pauth
ovj
okey
ometh
sch
rcallb
ikeid
For Dial-In Settings
itype
peer
peerid
iname
Vigor2925 Series User's Guide
It means Dial-Out Username.
"oname=admin" means to set Username = admin.
It means Dial-Out Password
"opwd=1234" means to set Password = 1234.
It means PPP Authentication.
"pauth=pc" means to set PPP Authentication = PAP&CHAP.
"pauth=p" means to set PPP Authentication = PAP Only
It means VJ Compression.
"ovj=on/off" means to enable/disable VJ Compression.
It means IKE Pre-Shared Key.
"okey=abcd" means to set IKE Pre-Shared Key = abcd.
It means IPSec Security Method.
"ometh=ah/" means AH.
"ometh=espd/espda/" means ESP DES without/with
Authentication.
"ometh=esp3/esp3a/" means ESP 3DES without/with
Authentication.
"ometh=espa/espaa" means ESP AES without/with
Authentication.
It means Index(1-15) in Schedule Setup.
sch=1,3,5,7 Set schedule 1->3->5->7
It means Require Remote to Callback.
"rcallb=on/off" means to enable/disable Set Require Remote
to Callback.
It means IKE Local ID.
"ikeid=vigor" means Set Local ID = vigor.
It means Allowed Dial-In Type. Available settings include:
"itype=t" means PPTP.
"itype=s" means IPSec.
"itype=L1"means L2TP (None).
"itype=L1" means L2TP(Nice to Have).
"itype=l2" means L2TP(Must).
It means specify Peer VPN Server IP for Remote VPN
Gateway.
Type "203.12.23.48" means to allow VPN dial-in with IP
address of 203.12.23.48.
Type "off" means any remote IP is allowed to dial in.
It means the peer ID for Remote VPN Gateway.
Type "draytek" means the word is used as local ID.
It means Dial-in Username.
"iname=admin" means to set username as "admin".
654