Draytek Vigor2925 Series User Manual page 170

Index
Enable
Physical Mode / Type
Line Speed
Active Mode
Note: In default, each WAN port is enabled.
After finished the above settings, click OK to save the settings.
W A N 1
W A N 1
WAN1/WAN2 is fixed with physical mode of Ethernet.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
Vigor2925 Series User's Guide
/ W A N 2 w i t h E t h e r
/ W A N 2 w i t h E t h e r
Click the WAN interface link under Index to access into the
WAN configuration page.
V means such WAN interface is enabled and ready to be
used.
Display the physical mode and physical type of such WAN
interface.
Display the downstream and upstream rate of such WAN
interface.
Display whether such WAN interface is Active device or
backup device.
n e t
n e t
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose
154