Draytek Vigor2925 Series User Manual page 177

After finishing all the settings here, please click OK to activate them.
D e t a i l s P a g e f o r S
D e t a i l s P a g e f o r S
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static or Dynamic IP as the accessing protocol of the internet, please click the Static
or Dynamic IP tab. The following web page will be shown.
Available settings are explained as follows:
Item
Enable / Disable
Keep WAN Connection
Address or specify another MAC address by typing on the
boxes of MAC Address for the router.
Specify a MAC Address – Type the MAC address for the
router manually.
t a t i c o r D y n a m i c I
t a t i c o r D y n a m i c I
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Normally, this function is designed for Dynamic IP
environments because some ISPs will drop connections if
there is no traffic within certain periods of time. Check
161
P i n W A N 1 / W A N 2
P i n W A N 1 / W A N 2
Vigor2925 Series User's Guide