Draytek Vigor2925 Series User Manual page 236

The router will determine which policy will be adopted for transmitting the packet
according to the priority of Static Route and Route Policy.

Failover to/Failback
Packets will be sent through another Interface or follow another Policy when the original
interface goes down (Failover to). Once the original interface resumes service
(Failback), the packets will be returned to it immediately.

Other routing.
Specify routing policy to determine the direction of the data transmission.
Note: For more detailed information about using policy route, refer to Support
>>FAQ/Application Notes on www.draytek.com.
Available settings are explained as follows:
Item
Index
Enable
Protocol
Interface
Priority
Src IP Start
Src IP End
Vigor2925 Series User's Guide
Description
Click the number of index to access into the configuration
web page.
Check this box to enable this policy.
Display the protocol used for this policy.
Display the interface to send packets to once the policy is
matched.
Display the priority of the selected profile in data
transmission.
Display the IP address for the start of the source IP.
Display the IP address for the end of the source IP.
220