Draytek Vigor2925 Series User Manual page 700

This command allows the user to configure wireless (5GHz) access control settings.
wl dual acl enable [ssid1 ssid2 ssid3 ssid4]
wl dual acl disable[ssid1 ssid2 ssid3 ssid4]
wl dual acl add [MAC][ssid1 ssid2 ssid3 ssid4][isolate]
wl dual acl del [MAC]
wl dual acl mode [ssid1 ssid2 ssid3 ssid4] [white/black]
wl dual acl show
wl dual acl showmode
wl dual acl clear
S y n t a x
S y n t a x
Parameter
enable [ssid1 ssid2 ssid3
ssid4]
disable [ssid1 ssid2 ssid3
ssid4]
add [MAC] [ssid1 ssid2
ssid3 ssid4] [isolate]
isolate
del[MAC]
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
show
showmode
clear
E x a m p
E x a m p
> wl dual acl showmode
SSID1: None
SSID2: None
SSID3: None
SSID4: None
Vigor2925 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to enable the settings for SSID1, SSID2, SSID3 and
SSID4.
It means to disable the settings for SSID1, SSID2, SSID3 and
SSID4.
It means to associate a MAC address to certain SSID
interfaces' access control settings. The isolate setting will
limit the wireless client's network capabilities to accessing
the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
It means to isolate the wireless connection of the wireless
client (identified with the MAC address) from LAN.
It means to delete a MAC address entry defined in the access
control list.
[MAC] format: xx-xx-xx-xx-xx-xx
It means to set white/black list for each SSID.
It means to display current status of access control.
It means to show the mode for each SSID.
It means to clear all of the access control settings.
l e
l e
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
684