Telnet Command: Wl Acl - Draytek Vigor2925 Series User Manual

T e l n e t C o m m
T e l n e t C o m m
This command allows the user to configure wireless access control settings.
wl acl enable [ssid1 ssid2 ssid3 ssid4]
wl acl disable [ssid1 ssid2 ssid3 ssid4]
wl acl add [MAC] [ssid1 ssid2 ssid3 ssid4] [isolate]
wl acl del [MAC]
wl acl mode [ssid1 ssid2 ssid3 ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clear
S y n t a x
S y n t a x
Parameter
enable [ssid1 ssid2 ssid3
ssid4]
disable [ssid1 ssid2 ssid3
ssid4]
add [MAC] [ssid1 ssid2
ssid3 ssid4] [isolate]
del [MAC]
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clear
E x a m p
E x a m p
> > wl acl showmode
ssid1: none
ssid2: none
ssid3: none
ssid4: none
> wl acl add 00-50-70-ff-12-70
Set Done !!
> wl acl add 00-50-70-ff-12-70 ssid1 ssid2 isolate
Set Done !!
> wl acl show
Vigor2925 Series User's Guide
a n d : w l a c l
a n d : w l a c l
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to enable the settings for SSID1, SSID2, SSID3 and
SSID4.
It means to disable the settings for SSID1, SSID2, SSID3 and
SSID4.
It means to associate a MAC address to certain SSID
interfaces' access control settings. The isolate setting will
limit the wireless client's network capabilities to accessing
the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
It means to delete a MAC address entry defined in the access
control list.
It means to set white/black list for each SSID.
It means to show access control status.
It means to show the mode for each SSID.
It means to clean all access control setting.
l e
l e
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
672