Telnet Command: Ip6 Neigh - Draytek Vigor2925 Series User Manual

-V
-o
E x a m p l e
E x a m p l e
> ip6 internet -W 2 -M 2 -u 88886666 -p draytek123456 –s
amsterdam.freenet6.net
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> system reboot
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to display IPv6 neighbour table.
ip6 neigh -s[ inet6_addr] [eth_addr] [LAN|WAN1|WAN2]
ip6 neigh -d [inet6_addr] [LAN|WAN1|WAN2]
ip6 neigh -a [inet6_addr] [-N LAN|WAN1|WAN2]
S y n t a x D e
S y n t a x D e
Parameter
-s
-d
-a
inet6_addr
eth_addr
LAN|WAN1|WAN2
E x a m p l e
E x a m p l e
> ip6 neigh -s 2001:2222:3333::1111 00:50:7F:11:ac:22:WAN2
Neighbour 2001:2222:3333::1111 successfully added!
> ip6 neigh -a
I/F ADDR
-------------------------------------------------------------------------
LAN FF02::1
WAN2 2001:5C0:1400:B::10B8
WAN2 2001:2222:3333::1111
WAN2 2001:2222:6666::1111
WAN2 ::
LAN ::
>
RADVD.
<dhcp/ra/none>= type IPv6 address.
It means to view IPv6 Internet Access Profile.
It means to set AICCU always on.
1=On,
0=Off
: i p 6 n e i g h
: i p 6 n e i g h
s c r i p t i o n
s c r i p t i o n
Description
It means to add a neighbour.
It means to delete a neighbour.
It means to show neighbour status.
Type an IPv6 address
Type submask address.
Specify an interface for the neighbor.
MAC
33-33-00-00-00-01
00-00-00-00-00-00
00-00-00-00-00-00
00-00-00-00-00-00
00-00-00-00-00-00
563
STATE
CONNECTED
CONNECTED
CONNECTED
CONNECTED
CONNECTED
NONE
Vigor2925 Series User's Guide