Draytek Vigor2925 Series User Manual page 253

Dual-wan security router

Hide thumbs Also See for Vigor2925 Series:

Table of Contents

DMZ Host for WAN2~ WAN4 is slightly different with WAN1. Active True IP selection is

available for WAN1 only.

See the following figure.

If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode in

WAN2 interface, you will find them in Aux. WAN IP for your selection.

Available settings are explained as follows:

Check to enable the DMZ Host function.

Enter the private IP address of the DMZ host, or click

Choose PC to select one.

Vigor2925 Series User's Guide