Draytek Vigor2925 Series User Manual page 512

Dual-wan security router
Hide thumbs Also See for Vigor2925 Series:
Table of Contents

Advertisement

Device Management
After finished the above settings, click OK to save the configuration.
F
o
r
I
P
v
F
o
r
I
P
v
Available settings are explained as follows:
Item
Management Access
Control
Access List
After finished the above settings, click OK to save the configuration.
Vigor2925 Series User's Guide
6
6
Check the box to enable the device management function
for Vigor2925.
Respond to external device – If it is enabled, Vigor2925
will be regarded as slave device. When the external device
(master device) sends request packet to Vigor2925,
Vigor2925 would send back information to respond the
request coming from the external device which is able to
manage Vigor2925.
Description
Allow management from the Internet - Enable the
checkbox to allow system administrators to login from the
Internet. There are several servers provided by the system
to allow you managing the router from Internet. Check the
box(es) to specify.
Enable PING from the Internet -
to enable all PING packets from the Internet. For security
issue, this function is disabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
IPv6 Address /Prefix Length- Indicate the IP address(es)
allowed to login to the router.
496
Check the checkbox

Advertisement

Table of Contents
loading

Table of Contents