Telnet Command: Exit; Telnet Command: Internet - Draytek Vigor2925 Series User Manual

T e l n e t C o m m
T e l n e t C o m m
Type this command will leave telnet window.
T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure detailed settings for WAN connection.
internet -W n -M n [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
-M n
<command><parameter
>|...]
-S <isp name>
-P <on/off>
-u <username>
-p <password>
-a n
-t n
-i <ip address>
-w <ip address>
-n <netmask>
-g <gateway>
Vigor2925 Series User's Guide
a n d : e x i t
a n d : e x i t
a n d : I n t e r n e t
a n d : I n t e r n e t
D e s c r i p t i o n
D e s c r i p t i o n
Description
M means to set Internet Access Mode (Mandatory) and n
means different modes (represented by 0 – 3)
n=0: Offline
n=1: PPPoE
n=2: Dynamic IP
n=3: Static IP
The available commands with parameters are listed below.
[...] means that you can type in several commands in one
line.
It means to set ISP Name (max. 23 characters).
It means to enable PPPoE Service.
It means to set username (max. 49 characters) for Internet
accessing.
It means to set password (max. 49 characters) for Internet
accessing.
It means to set PPP Authentication Type and n means
different types (represented by 0-1).
n=0: PAP/CHAP (this is default setting)
n=1: PAP Only
It means to set connection duration and n means different
conditions.
n=-1: Always-on
n=1 ~ 999: Idle time for offline (default 180 seconds)
It means that PPPoE server will assign an IP address
specified here for CPE (PPPoE client).
If you type 0.0.0.0 as the <ip address>, ISP will assign
suitable IP address for you. However, if you type an IP
address here, the router will use that one as a fixed IP.
It means to assign WAN IP address for such connection.
Please type an IP address here for WAN port.
It means to assign netmask for WAN connection. You have
to type 255.255.255.xxx (x is changeable) as the netmask for
WAN port.
It means to assign gateway IP for such WAN connection.
540