Minimum Safety Distances - Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual

1.9 MINIMUM SAFETy dISTANCES

Walls
FLAMMABLE WALLS: the installation of the appliance next to flammable
walls P is only permitted where suitable insulation and non-combustible
protective material is used.
In order to insulate the appliance and correctly install the cladding,
construct a supporting wall made of non-flammable material (e.g.
plasterboard) placing a thermal insulation layer L with thickness of 3
cm between this supporting wall and the flammable wall P.
Always leave a 5 cm air interspace between the appliance and
supporting wall. (Fig. 15)
NON-FLAMMABLE WALLS: always leave a 5 cm air interspace between
the appliance and wall Q. (Fig. 16)
Ceiling
FLAMMABLE CEILING: where there is a flammable ceiling R, create a
false ceiling S using non-flammable material with at least 8 cm thick
thermal insulation. (Fig. 17)
There must be a minimum distance of 20 cm between false ceiling S
and connection to the flue.
NON-FLAMMABLE CEILING: there must be a minimum distance of 20
cm between the ceiling and connection to the flue. (Fig. 17)
a
Reference to minimum ceiling distance denotes the distance
between connection to the flue and any other element located
above (e.g. beams).
Ground or flooring
Where the ground or flooring consists of flammable materials, it must
be protected by a 3 cm thick thermal insulation layer.
Hazardous radiation area
The radiation area refers to the area between the fireside opening up to
a distance of 80 cm outwards, both to the front and sides. No flammable
objects must be placed within this area, for example: carpets, curtains,
wood furniture, ornaments, flammable liquids, products to ignite fires
or firewood, etc.
a
Failure to comply with the above could result in fire!!!
Fig. 15
P
3
L
Fig. 16
Q
5
Fig. 17
H07028420 / DT2000990 – 01
L
5
5
5
R
S
DT2012404-00
3
3
5
L
DT2033466-00
5
DT2033467-00
8
20
H
DT2033465-00
9