Position Of Insert In Housing And Cladding - Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual

5.1 POSITION OF INSERT IN hOUSING ANd CLAddING

The IP pellet insert was designed to safeguard already-existing fireboxes which no longer function or for insertion in already-present housings or in
new-builds.
To enable installation and maintenance of the product, it is essential, in both cases to ensure the correct distance of the insert from the installation
housing walls, the relative position with respect to the cladding and the free hole at the cladding inlet.
Fig. 34
48
(2)
43 (1)
Measurements in cm
(a) = IP 78/58 - SCP 9
(b) = IP 78/68
N. Description
1 Minimum side space, with product extracted, to enable installation, disassembly.
2 Minimum side space, with product extracted, to enable access to electrical parts (without dissembling the entire product).
3 Gap between front panel and upper crosspiece of the product to enable installation and disassembly of the product.
4 Minimum cladding opening inlet hole.
5 Minimum side and back space between product and internal housing.
22
1
(3)
H07028420 / DT2000990 – 01
79
(4)
5
(5)
5
(5)
DT2033610-01
59
(4)(a)
69
(4)(b)
5
(5)
48
(2)
43
(1)
DT2033610-01