Assembly Of Extractable Part; Installation Of Optional Support - Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual

5.7 ASSEMbLy OF ExTRACTAbLE PART

Now proceed with the final operations before installation is complete.
Subsequent to a further check on what has been completed up to this
point, proceed as follows:
- COMPLETELY extract the sliding rails present on the base;
- insert the lifting handle provided into the respective housings present
on both sides of the extractable part; lift it and CAREFULLY approach
the rails keeping the product slightly inclined with the right part lower
(Fig. 51);
- WITH CARE lay the product on the rails, resting the right side first
followed by the left side, placing the threaded pins present on the rails
into the relative housings present on the sliding part. To facilitate this
operation, holes are present on the right side and small buttonholes
on the left side;
- at this stage, screw the flange nuts, which were removed during the
initial installation stage, which join the two parts of the appliance (Fig.
51);
- check full sliding of the rails numerous times, check that there are
no obstructions upon closing and check for correct coupling of the
product, indicated by a "click" sound.
a
During final checking, pay careful attention to ensure correct
insertion of the smoke outlet pipe in its housing and that no
cables are present which may impede scrolling of the product.
These issues should not arise if installation has been correctly
executed.

5.8 INSTALLATION OF OPTIONAL SUPPORT

Position the support [B] at the established point taking into account its
position with respect to the firebox and fix it to the flooring using the
holes [A] present on the support feet. (Fig. 52)
a
You must secure the support to the supporting floor to ensure
that the product will not overturn and to hold the weight of the
cantilevered product itself.
It is equally important that flooring and fixing points ensure
stable, safe assembly.
28
Fig. 51
Fig. 52
H07028420 / DT2000990 – 01
A
A
A
DT2012096-00
DT2033022-00
DT2012281-00
A
DT2033258-00