Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual page 35

C L E A N I N G
Action
B R A Z I E R
Hold the ON/OFF key
1 2 : 0 0 2 2
down for several
seconds
1
a
Never unplug the stove from the power supply at this stage as this could cause internal problems and compromise subsequent
ignition operations.
S E T T E M P
R O O M
Action
1
S E T T E M P
R O O M
. c
7
Press the
1
TEMPERATURE
key and
to select
a
The room sensor must be connected. If the room sensor is not connected the appliance does not modulate the power and operates
to user settings.
.
c
Fuel loading stops, while the cooling fan and the extractor fan continue to
operate until the stove has cooled.
• The readout "PUL" appears in STOVE STATUS along with the flue gas
temperature. See the section on programming.
. c
7
Stove operation can be regulated by any kind of external room thermostat
connected to the electronic board.
To connect the thermostat, see "INSTALLING THE EXTERNAL ROOM
THERMOSTAT".
With the stove powered, irrespective of the operating status, set the stove
to the minimum temperature value of 7°C.
Operation of the external thermostat depends on the stove temperature
setting:
- if the set stove temperature is less than the room temperature, the
external thermostat prevails.
- if the set stove temperature is more than the room temperature, the
internal stove thermostat prevails. The external thermostat is disabled.
SHUTDOWN
Description
EXTERNAL THERMOSTAT
Description
H07028420 / DT2000990 – 01
Display
C L E A N I N G
B R A Z I E R
. c
1 2 : 0 0 2 2
1
DT2040060-05
Display
S E T T E M P
R O O M
. c
7
1
DT2040059-07
35