Programming The Clock - Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual

6.9 PROGRAMMING ThE CLOCk

The stove leaves the factory with the clock already set. All that needs to be done, therefore, is to check that the time is precise or if any change is
needed because of summer time.
Correct time setting is necessary to be able to use all the functions where time is involved.
Setting the clock entails programming the following values: day, hour and minutes.
These values are displayed in sequence upon pressing the SELECTOR key.
Function
Press the MENU key, select the SET CLOCK menu using the SELECT MENU
Set the day
key, then confirm by pressing the SET key.
Confirm setting and Press the SELECT MENU key and set the "day".
move to next section Confirm by pressing the SET key.
Press the SELECT MENU key and set the current "hour". Confirm by
Set the hour
pressing the SET key.
Press the SELECT MENU key and set the "minutes". Confirm by pressing
Set the minutes
the SET key. After confirmation the initial display will reappear.
40
SET CLOCK (current day/time)
Action
H07028420 / DT2000990 – 01
DT2011296-00
Display
S E T
S E T S E T
S E T
C L O C K
C L O C K C L O C K
C L O C K
1 1 1
1
D A Y
D A Y D A Y
D A Y
M O N D A Y
M O N D A Y M O N D A Y
M O N D A Y
1
1 1
1
H O U R S H O U R S H O U R S
H O U R S
C L O C K
C L O C K C L O C K
C L O C K
1 2 :
1 2 : 1 2 :
1 2 :
1
1 1
1
M I N U T E S
M I N U T E S M I N U T E S
M I N U T E S
C L O C K
C L O C K C L O C K
C L O C K
: 0 1
: 0 1 : 0 1
: 0 1
1
1 1
1
DT2040064-03