Control Panel; Setting The Language - Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual

6.6 CONTROL PANEL

The appliance boasts an emergency device with 2 buttons and an LED,
positioned on the bottom right of the door; using this, it is possible to
control the appliance in the instance where the remote control with LCD
display is not functioning.
The functions of the 2 buttons and the significance of the LED colours
based upon appliance command or status are listed below.
NUMBER KEY / DISPLAY
1
Button P2
2 Button P1
3 GREEN LED continually illuminated
4 GREEN LED flashing
5 BLUE LED continually illuminated
6 BLUE LED flashing
7
RED LED continually illuminated
8 RED LED flashing

6.7 SETTING ThE LANGUAGE

This function allows one of the languages available to be set on the display according to the country where the product is installed.
Function
Selecting the
Press the MENU button, use the MENU SELECTION button to select the
language menu SELECT LANGUAGE menu and the SET button to confirm.
Selecting the Scroll with the MENU SELECTION button to find the required language (e.g.
language LANGUAGE ENGLISH) and confirm with the SET button.
After confirmation the readout FUNCTION ENABLED appears on the
display, which then automatically returns to the initial readout.
38
Fig. 60
Pressing button P2 enables manual start-up or shut-down of the appliance.
Pressing button P1 enables the modification of the set power level.
Appliance is off but powered.
Appliance is at start-up stage. It is activated when button P2 is pressed for a few moments
(from 3 to 5 seconds).
Upon successfully completing CHECKS – START-UP STAGE I – START-UP STAGE II of the start-
up cycle, the appliance moves into the operational stage (BLUE LED continually illuminated).
Appliance is in operational stage.
Appliance is in power modification stage. It is activated when button P1 is pressed.
The number of flashes indicate the set power level (e.g. 2 flashes represent power level 2).
The appliance reverts to the operational stage (BLUE LED continually illuminated) once the
power level is set.
Appliance is in shut-down stage. It is activated when button P2 is pressed for 5 seconds.
When it has been shut down, it reverts to the off status although it is still powered (GREEN
LED continually illuminated).
Appliance is in emergency stage.
HOW TO SET THE LANGUAGE
Action
H07028420 / DT2000990 – 01
DESCRIPTION
Display
S E L E Z I O N A
S E L E Z I O N A
S E L E Z I O N A
L I N G U A
L I N G U A
L I N G U A
1
1
1
L I N G U A
L I N G U A
L I N G U A
E N G L I S H E N G L I S H
E N G L I S H
1 1
1
F U N C T I O N
F U N C T I O N
F U N C T I O N
E N A B L E D
E N A B L E D
E N A B L E D
1 1
1
DT2012075-00
P1
Led
P2
DT2033006-00
DT2010469-04