Remote Control - Piazzetta IP 78/68 Instructions For Installation, Use And Maintenance Manual

6.2 REMOTE CONTROL

• The pellet stove comes equipped with an LCD-display remote control
and radio transmitter which allow you to operate its various functions.
a
The remote's range can be affected by other devices which
operate on a continuous radio frequency of 433.92 MHz, for
example radio headphones, toys, computers etc.
The remote has a range of around seven metres in conditions
where there is no interference from other sources.
• When pressing the keys to select the various functions wait for
a signal from the stove that the selection has registered before
selecting further functions. Or if you are in an adjoining room wait
for confirmation on the remote's display. If the stove is not receiving
signals from the remote try bringing the remote closer to the stove.
Below are listed the various functions of the remote control's keys.
NUMBER KEY / DISPLAY
1 Key ON/OFF
2 Key STAND-BY
3
Key POWER
4
Key FAN SPEED
5
Key SELECT
6 Key TEMPERATURE
7
Key TIMER
8 Key MENU
9 Key SET
10
Key MENU SELECTION
11
Key ESC
12
Key OPT
13 Display
14
Display POWER
15 Display MULTIFUOCO
16 Display DAYS OF THE WEEK
17 Display RADIO SIGNAL EMISSION
18 Display TIMER
19
Display SAFETY
20 Display FLAT BATTERY
Fig. 58
Allows you to start up or shut down the stove.
Pressing the stand-by key and holding it down (for around 5 seconds) until KEYPAD BLOCKED
appears on the display will disable the keypad. To re-enable the keypad press the stand-by key
and hold it down (for around 8 seconds) until KEYPAD UNBLOCKED appears on the display.
Allows you to select the power setting. With the SELECT key you can choose between the five
available settings, P1-P2-P3-P4-P5.
Allows you to choose the speed setting on the Multifuoco fan. With the SELECT key you can
choose between the four available settings, 01-02-03-04.
Allows you to choose: • power level - having previously pressed the POWER key;
• fan speed - having previously pressed the FAN SPEED key;
• temperature - having previously selected the TEMPERATURE key.
Allows you to set the room temperature. The SELECT key will allow to choose the desired
temperature between 7°C and 30°C.
Displays the current date and time.
Allows: • access to the programming menu;
• return to the initial display.
Confirm MENU selected.
Scrolls through the programming MENU.
Returns to previous menu.
Displays the MULTICOMFORT temperatures. The dash before the temperature shows which
sensor is giving the temperature reading.
Shows on three lines the function settings, the current time and the temperature.
Shows the power setting selected, P1-P2-P3-P4-P5.
Shows the Multifuoco setting selected, 01-02-03-04. The two lines of squares to the left and to
the right show respectively the left or right fan.
Shows the day of the week, 1 Monday, 2 Tuesday, 3 Wednesday, 4 Thursday, 5 Friday, 6 Saturday,
7 Sunday.
Active if the remote is receiving data from the stove.
Shows that the timer is engaged.
Symbol appears when the safety system is activated.
Shows that the battery is flat or running down.
H07028420 / DT2000990 – 01
15
19
18
16
!
2
1 2 3 4 5 6 7
4
3
GRUPPO PIAZZETTA
5
8
9
MENU ESC
SET OPT
10
DESCRIPTION
DT2010220-06
17
20
13
14
1
6
7
11
12
DT2030325-00
31