Service Interval Display - Skoda Yeti Owner's Manual

Activate/deactivate the travel mode fea-
Travel mode
ture» page
Resetting Lights & Visionmenu item to the factory set-
Factory setting.
ting.
Coasting -Enable / disable the idle position (coasting) for vehicles with automat-
ic transmission » page 110, Driving in neutral ("coasting").
Time - Setting the time, the time format (24 or 12 hour) and the change-over to
summer/winter time.
Winter tyres - Setting the speed and the switching on and off of the acoustic sig-
nals when exceeding this speed. This function is, for example, used for winter
tyres where the maximum permissible speed is lower than the maximum
speed of the vehicle » page 152, Wheels and tyres. If the set speed is excee-
ded, an audible signal sounds and the following message appears in the infor-
mation display.
Units - Setting the units for temperature, consumption and distance travelled.
Assistants - Adjustment of the sound in Park
(ParkPilot).
Alt. speed dis. Turn on / off the display of the second speedometer in
mph » page 41, Display of the second speedometer.
1)
ServiceDisplay the distance travelled and the days until the next service
date» page

46, Service interval display.

Factory setting. - Resetting the display functions to factory settings.
Service interval display

Introduction
This chapter contains information on the following subjects:
Prompt in the MAXI DOT display
Prompt in the segment display
Resetting the service interval display
The service interval display shows the kilometres or days until the next service
event.
1)
For models with the speedometer in mph, the second speedometer is displayed in km/h.
46
Using the system
64.
Assist» page 116, Parking aid
Information regarding the service intervals
Prompt in the MAXI DOT display
Messages before reaching the scheduled service date
Before the next service date has been reached, the symbol as well as a mes-
sage about the mileage or days until the next service event appears in the dis-
play after switching on the ignition.
Messages upon reaching scheduled service date
Once the service appointment is reached, a message appears in the display af-
ter switching on the ignition.
Displaying the distance and days until the next service interval
Messages about the remaining kilometres and days until the next service date
can be displayed at any time when the ignition is switched on by going to the
Service menu item » page 45, Menu item Settings or from the Vehicle status in the
main menu of the Maxi DOTdisplay.
Prompt in the segment display
Explanation of figure » Fig. 27
Service due

Differentiating between types of service
A
46
▶
 - Oil change service
46
▶
 - Inspection
47
 - Days remaining until the next service interval
B
Kilometres remaining until the next service interval
C
» page 135.
» page 44.
Fig. 27
Segment display: Example of a
message
