Skoda Yeti Owner's Manual page 176

Protective grille for removing fog lights- plug for Park Assist
sensor
Fig. 200 Guard: Version 1/version 2
Fig. 201 Remove the plug

Read and observe and
›
Remove the plastic cover for the guard in the arrow direction
the bow to pull the full wheel covers.
›
Remove the remaining part of the grille.
›
Pull the latch out of the connector in the direction of arrow
›
Undo the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
Insertion of the ashtray takes place in reverse order.
1)
Applies to vehicles with parking assistance system.
174
Do-it-yourself
on page 172 first.
» Fig. 200
» Fig.
1
.
2
.
3
Changing light bulbs for fog lights
Fig. 202 Remove the number plate light / replace the bulb

Read and observe
First remove the grille for the fog lights and before changing bulbs
on page 173 and / or
Removing the headlight
›
Unscrew the screws
›
Remove the headlight in the direction of arrow
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Pull the plug on the lamp base.
›
Turn the socket with the bulb to the stop in the direction of the arrow
» Fig. 202.
3
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow as far as the stop.
3
›
Attach the connector on the lamp base.
using
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 202 and tighten.
201.
›
Attach the connector on guard carefully
›
Insert the protective grille and press it in.
›
Replace the plastic cover and press into the guard
The protective grille must engage firmly.
and on page 172 first.
» Fig. 200 on page 174.
» Fig. 202 with the screwdriver from the tool kit.
A
.
1
.
2
» Fig. 201 on page 174
» Fig. 200
» Fig. 199
2
.
1)
on page 174 .
1)
