Skoda Yeti Owner's Manual page 177

CAUTION
For vehicles with parking assistance, we recommend that after changing the
light bulb in the fog lights, the system is checked by a specialist.
Changing the bulb for the licence plate light
Fig. 203 Remove / replace the bulb for the number plate light

Read and observe and
›
Open the boot lid.
›
Push the light in the direction of arrow
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
›
Close the boot lid.
on page 172 first.
» Fig. 203 until it comes loose.
1
and remove it.
2
.
1
Removing/installing taillights
Fig. 204 Remove light / pull out connector

Read and observe
Removing
›
Open the boot lid.
›
Use the screwdriver from the tool kit to unscrew the lamp
›
Grasp the light and carefully remove with shaky movements in the direction
of arrow » Fig. 204.
1
›
Disconnect the plug connection by pressing the catches in direction of arrow
and by pulling them in direction of arrow
2
.
3
Fitting
›
Insert the connector into the light and lock it securely.
›
Insert the light into the mounts in the body
›
Carefully press the light into the body so that the bolts
page 176 or » Fig. 206
the body» .
›
Screw the light with the screws into place
›
Close the boot lid.
CAUTION
Ensure that the vehicle paintwork and the tail lamp are not damaged when re-
moving and installing the tail lamp.
and on page 172 first.
.
3
» Fig. 204.
on page 176 on the light engage into the mounts on
» Fig. 204.
Fuses and light bulbs
» Fig. 204.
» Fig. 205 on
1
175