Table of Contents
Advertisement
›
or: press the buttonunderneath to the stop, the window automatically opens
fully. Renewed pressing of the button causes the window to stop.
›
To open, lightly press the button above and hold it until the window has
moved into the desired position.
›
or: press the buttonabove to the stop, the window automatically opens fully.
Renewed pressing of the button causes the window to stop.
Force limiter
Read and observe
and
The electric windows are fitted with a force limiter.
If there is an obstacle, the closing process is stopped and the window goes
down by several centimetres.
If the obstacle prevents the window from being closed during the next 10 sec-
onds, the closing process is interrupted once again and the window goes down
by several centimetres.
If you attempt to close the window again within 10 seconds of the window be-
ing moved down for the second time, even though the obstacle was not yet
been removed, the closing process is only stopped. During this time it is not
possible to automatically close the window. The force limiter is still switched
on.
The force limiter is only not operational if you attempt to close the window
again within the next 10 seconds – the window will now close with full force!
If you wait longer than 10 seconds, the force limiter is switched on again.
Window convenience operation
Read and observe
and
The convenience operation for the window offers the option to open/close all
the windows at once (or only the window in the driver's door). The setting, ac-
tivation and deactivation for the window convenience operation is in the MAXI
DOT display in the Window op. menu item.
Opening
›
Press and hold the button on the key.
›
OrHold the key in the unlock position in the driver's door lock.
›
or:Hold the central locking button in the area of the symbol
page 51.
on page 55 first.
on page 55 first.
» page
45.
» Fig. 32
›
OrSwitch off the ignition, open the driver's door and hold the key
stops in the open position
Closing
›
Press and hold the button on the key.
›
OrHold the key in the lock position in the driver's door lock.
›
Or:Hold the central locking button in the area of the symbol
page 51 .
›
OrSwitch off the ignition, open the driver's door and hold the key
stops in the closed position
›
In the KESSY system, hold your finger on the sensor on the outside of the
door handle of the front door
The convenience operation will only function correctly if all the windows auto-
matically open/close properly.
Convenience opening or closing the window using the key in the driver's door
locking cylinder is only possible within 45 seconds of locking the vehicle.
The movement of the window is stopped immediately when the respective
button is released.
Operational faults
Read and observe
Repeatedly opening and closing the window can cause the window mecha-
nism to overheat and become temporarily blocked. You will be able to operate
the window again as soon as the operating mechanism has cooled down.
The electric windows are deactivated after the vehicle battery has been dis-
connected. After connecting the vehicle battery, the system is activated as fol-
lows.
Window in the driver's door
›
Switch on the ignition.
›
Pull the top edge of the button and close the window.
›
Release the button.
›
Pull up the respective button and hold for 1 second.
Windows in the other doors
›
Switch on the ignition.
›
Press the respective key above and close the window.
›
on
Release the button.
›
Pull up the respective buttonabove and hold for 1 second.
» Fig. 38
on page 56.
» Fig. 38
on page 56.
» Fig. 31
on page 51.
and
on page 55 first.
Unlocking and opening
until it
A
» Fig. 32
on
until it
A
57
Hide quick links:
Advertisement
Chapters
Table of Contents
