Skoda Yeti Owner's Manual page 167

Front towing eye
Fig. 180 Remove cap / install towing eye
Cap removal/fitting
›
To remove, press down on the cap in the direction of arrow
in the direction of arrow » Fig.
2
›
To fit it, insert the cap in arrow range
edge of the cap. The cap must engage firmly.
Removing/installing the towing eye
›
To fit, screw in the towing eye by hand in the direction of the arrow
» Fig. 180 until it clicks into place»
3
For tightening purposes, we recommend, for example, using the wheel
wrench, towing eye from another vehicle or a similar object that can be pushed
through the eye.
›
To removeit, unscrew the towing eye in the opposite direction to arrow
WARNING
The towing eye must always be firmly in place, otherwise the towing eye
could break whilst being towed.
and remove it
1
180.
and then press on the opposite
1
.
Towing eye rear
Fig. 181 Remove cap / install towing eye
Cap removal/fitting
›
To remove, press down on the cap in the direction of arrow
in the direction of arrow
›
To fit it, insert the cap in arrow range
edge of the cap. The cap must engage firmly.
Removing/installing the towing eye
›
To fit, screw in the towing eye by hand in the direction of the arrow
» Fig. 181 until it clicks into
3
For tightening purposes, we recommend, for example, using the wheel
wrench, towing eye from another vehicle or a similar object that can be pushed
through the eye.
›
. To removeit, unscrew the towing eye in the opposite direction to arrow
3
Vehicles with a trailer device
For vehicles with factory-fitted towing device, at the back there is no mount
for a screw-in towing eye. Use the detachable ball rod for towing
Hitch.
WARNING
The towing eye must always be firmly in place, otherwise the towing eye
could break whilst being towed.
» Fig. 181.
2
and then press on the opposite
1
place» .
Emergency equipment and self-help
and remove it
1
.
3
» page 126,
165