Replacing the bulbs in the taillight assembly
Fig. 205 Inner part of the light: Ground light
Fig. 206 Inner part of the light: Light with LED diodes
Read and observe
and
Ground light
›
With the spanner from the vehicle tools unscrew the securing screw
» Fig.
205.
›
Unlock the bulb holder using the locking latches in the areas
marked with arrows and remove the bulb holder from the light.
›
Turn the respective bulb
until it stops counter-clockwise and remove it
B
from the bulb holder.
›
Insert a new bulb
into the holder and turn in a clockwise direction to the
B
stop.
›
Pull bulb
out of the socket and insert a new bulb.
C
›
Insert the lamp holder in the lamp and screw in the locking screw
» Fig. 205
.
176
Do-it-yourself
on page 172 first.
» Fig. 205
Light with LED diodes
›
Unlock the bulb holder using the locking latches in the areas
marked with arrows and remove the bulb holder from the light.
›
Turn the respective light bulb
remove it from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the lamp holder in the lamp until it is secure.
A
A
» Fig. 206
» Fig. 206
until it stops counter-clockwise and