Skoda Yeti Owner's Manual page 33

Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

Coolant temperature gauge
The display
» Fig. 18
only works if the ignition is switched on.
Cold range - the pointer is in the range
operating temperature. Avoid high speeds and high engine loads.
Operating range - the pointer is in the range
High temperature range - the pointer is in the range
ture is too high. The warning light
cluster .
Fuel gauge
The display
» Fig. 19
only works if the ignition is switched on.
The tank capacity is 55 litres or approximately 60 litres for Yeti 4x4.
If the fuel level reaches the reserve level
minates in the instrument
cluster» page
Fig. 18
Coolant temperature gauge
, the engine has not yet reached its
A
.
B
. The coolant tempera-
C
» page 34
illuminates in the instrument
Fig. 19
Fuel gauge
» Fig.
19, the warning light
A
38.
WARNING
For the vehicle systems to function correctly, and thus for safe driving,
there must be sufficient fuel in the tank. Never drain the fuel tank com-
pletely – risk of accident!
CAUTION
Never drive until the fuel tank is completely empty! Irregular supply of fuel can
cause misfiring, which can result in damage to parts of the engine and the ex-
haust system.
Note
After filling up, it can occur that during dynamic driving (e.g. numerous curves,
braking, driving downhill and climbing a steep hill) the fuel gauge indicates a
fraction less.
Lighting of the instrument cluster
The brightness of the of the instrument cluster lighting can be adjusted indi-
vidually when the dipped beam / parking light is switched.
To Control of lighting brightness the regulator of the instrument cluster 
turn
» Fig.
20.
Note
On vehicles with MAXI DOT display, the brightness of the instrument lighting is
set automatically. A manual brightness adjustment can therefore only have a
limited effect.
illu-
Fig. 20
Controller for instrument cluster
lighting
Instruments and Indicator Lights
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents