Rear View Mirror - Skoda Yeti Owner's Manual

Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

Headlight cleaning system
Read and observe
and
The headlights are cleaned with every first and after every fifth spraying of the
windscreen under the following conditions.
The ignition is switched on.
The low beam is switched on.
The outside temperature is about -12° C to +39° C.
To ensure the correct functioning of the system, even in winter, this needs to
be regularly cleared of snow and ice (e.g. using the de-icing spray).

Rear view mirror

Introduction
This chapter contains information on the following subjects:
Interior mirror dimming
Mirrors
WARNING
Exterior mirrors increase the field of view, however, they make objects ap-
pear smaller and further away. Therefore, use the interior mirror whenever
possible, for assessing the distances to the vehicles following behind.
WARNING
The mirrors with automatic dimming contain electrolyte fluid which may
leak if the mirror glass is broken - this can irritate skin, eyes and the respi-
ratory system.
If your eyes or skin come into contact with the electrolytic fluid, immedi-
ately wash the affected area for a few minutes long with a lot of water. If
necessary get medical assistance.
68
Using the system
on page 66 first.
Interior mirror dimming
Fig. 53 Interior mirror: manual dimming/auto-darkening
Read and observe
Mirrors with manual dimming
Basic mirror position (not darkened)
1
Mirror blackout
68
2
69
Mirror with automatic dimming
The mirror dimming
» Fig. 53
start.
When the interior lights are switched on or the reverse gear is engaged, the
mirror moves back into the basic position (not dimmed).
WARNING
Attach external devices (e.g. navigation system) not in the vicinity of the
mirror with automatic dimming. The illuminated display of an external de-
vice can affect the function of the rear-view mirror -There is a risk of an ac-
cident.
Automatic mirror dimming only operates correctly if the light striking the
sensor is not affected by other objects. The sensors are located on the
front and back of the mirror.
on page 68 first.
» Fig. 53
- 
-  is automatically controlled after the engine

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents