Table of Contents
Advertisement
16
Instruments and Indicator/Warning Lights
Speedometer with counter for distance
driven
The distance which you have driven with your vehicle is shown in kilome-
tres (km). On certain model versions, the readout is shown in "miles".
Bottom counter (trip counter) for distance driven
The bottom counter indicates the distance which you have driven since
this counter was last reset - in steps of 100 metres or 1/10 of a mile. It can
be reset to zero by pressing the reset button next to the trip counter
⇒ fig.
4.
Top counter for distance driven
The top counter for distance driven indicates the total distance in kilome-
tres or miles which the vehicle has been driven.
Fault display
dEF will appear as a constant text in the display field of the counter for
distance driven if there is a fault in the instrument cluster. Have the fault
rectified as soon as possible by a specialist workshop.
Warning against excessive speeds*
An acoustic warning signal will sound when the vehicle speed exceeds
120 kilometres per hour. The acoustic warning signal will switch off again
when the vehicle speed goes below this speed limit.
This function is only valid for some countries.
Never seek to adjust the trip counter for distance driven while
driving for safety reasons!
Fig. 4 Instrument
cluster: Counter for
distance driven
Service Interval Display
WARNING
Fig. 5 Instrument
cluster: Service
Interval Display
Advertisement
Table of Contents
