Skoda Yeti Owner's Manual page 115

Traction control (TCS)
Fig. 131 Vehicle with ESC / vehicle without ESC

Read and observe on page 112 first.
TCS prevents the spinning of the wheels of the driven axle. TCS reduces the
drive power transmitted to the wheels in the case of slipping wheels. Thus, for
example, driving on road surfaces with low grip is made easier.
During a TCS intervention, the indicator light
ter.
The deactivation/activation of TCS can be carried out, depending on equip-
ment, in one of the following ways.
▶
By pressing the  » Fig. 131 button.
▶
By pressing the  » Fig. 131 button.
With deactivation, the warning light lights up in the instrument cluster and
an appropriate message is displayed in the instrument cluster.
With activation, the warning light
sage is displayed in the instrument cluster.
The TCS should normally always be enabled. The system should be deactivated
only in the following situations, for example.
▶
When driving with snow chains.
▶
When driving in deep snow or on a very loose surface.
▶
When it is necessary to "rock" a car free when it has become stuck.
flashes in the instrument clus-

is extinguished and an appropriate mes-

Electronic Differential Lock (EDL)

Read and observe on page 112 first.
EDL prevents the turning of the respective wheel of the driven axle. EDL
brakes a spinning wheel if required and transfers the drive power force to the
other drive wheel. Driving becomes easier on road surfaces with different trac-
tion under each wheel of the driven axle.
EDL switches off automatically to avoid excessive heat generation on the
brake of the wheel being braked. Once the brakes have cooled down, there is
an automatic re-activation of EDL.
Driver Steering Recommendation (DSR)

Read and observe on page 112 first.
In critical situations, the DSR provides the driver with a steering recommenda-
tion in order to stabilise the vehicle. DSR is activated, for example, on the right
and left vehicle side when braking sharply on different road surfaces.
Brake Assist (HBA)

Read and observe on page 112 first.
The HBA increases the braking effect and helps to reduce the braking dis-
tance.
The HBA is activated by very quick operation of the brake pedal. In order to
achieve the shortest possible braking distance, the brake pedal must be ap-
plied firmly until the vehicle has come to a standstill.
The HBA function is automatically deactivated when the brake pedal is re-
leased.
Hill Start Assist (HHC)

Read and observe on page 112 first.
When moving off on a gradient, HHC allows you to move your foot from the
brake pedal to the accelerator pedal without the vehicle rolling downhill.
The vehicle is braked by the system for about 2 seconds after releasing the
brake pedal.

113
Assist systems