Skoda Yeti Owner's Manual page 71

Mirrors

Read and observe on page 68 first.
The exterior mirrors can (depending on vehicle equipment) have a manual or
electric fold-in function, automatic dimming and memory function.
The rotary knob can be moved into the following positions (depending on ve-
hicle equipment)
Adjust the left-hand exterior mirror

Switch off mirror control

Adjust the right-hand exterior mirror

Exterior mirror heater (only operates when the engine is running)

Folding in the mirrors electrically (to fold back, move the rotary knob to an-

other position) »
Setting the mirror area
›
Move the rotary knob in the direction of arrows
If the mirror setting fails at any time, the mirrors can be adjusted manually by
pressing on the edge of the mirror area.
Setting the mirror surfaces synchronously
This function allows the simultaneous adjustment of the two mirror areas. This
mode can be enabled or disabled via the Maxi DOT display in the Adjust mir-
rors» page 45, Menu item Settings menu item.
›
Turn the knob for the mirror control to the position for the driver mirror ad-
justment.
›
Adjust the mirror areas to the desired position.
Fig. 54
Exterior mirror operation
» Fig. 54.
Manual folding mirrors
The mirror can be manually folded in towards the side window. To put it back
into its original position, it should be folded back from the side window until it
audibly clicks into place.
Folding-in both of the exterior mirrors using the remote control key
›
Close all windows and hold the button  on the remote control key.
The exterior mirror is folded back into the driving position when the ignition is
switched on.
Mirror with automatic dimming
The exterior mirror dimming is controlled together with the automatic rear-
view mirror dimming » page 68.
Memory function for mirror (vehicles with electrically adjustable driver's
seat)
It is possible to save the current setting of the exterior mirror when saving the
driver's seat position with » page
justable seator » page 72, Memory function of the remote control key.
Tilting the mirror area of the front passenger mirror (vehicles with
electrically adjustable driver's seat)
The front passenger mirror area can be tilted to the stored position to improve
the view to the curb when reversing.
Operating conditions.
The function is activated via the MAXI DOT display in the menu item Mirror

down » page 45, Menu item Settings.
The setting of the mirror area has been previously stored

Memory Function of the electrically adjustable seat or.
ry function of the remote control key.
The reverse gear is engaged.

The knob for the mirror control is in the position for the passenger mirror

adjustment.
The mirror area returns to its initial position after the rotary knob is set to an-
other position or if the speed is greater than 15 km/h.
WARNING
Do not touch the exterior mirror surfaces, if the exterior mirror heating is
switched on - hazard of burning.
71, Memory Function of the electrically ad-
» page
» page
Lights and visibility
71,
72, Memo-

69