Front Seat Heating - Skoda Yeti Owner's Manual

Removing/installing
Fig. 68 Removing/installing the headrest
›
To remove the headrest, pull it out of the seat backrest up to the latch.
›
Press locking button in the direction of arrow
A
straint in the direction of arrow
›
To insert the headrest, push the headrest into the seat backrest in the direc-
tion of arrow until the locking button clicks into place.
3

Front seat heating

The seat backrests and seats can be heated electrically.
Seat heating buttons » Fig. 69
Left seat heating

Right seat heating

›
To turn on the heating with maximum heat , press the key  or  button.
By repeatedly pressing the button, the heat is turned down until it is com-
pletely switched off. The level of the seat heating is indicated by the number
of illuminated warning lights in the switch.
76
Using the system
and pull out the head re-
1,
» Fig. 68.
2
Fig. 69
Buttons for heating the front
seats
The seat heating only operates when the engine is running.
WARNING
If you are sensitive to pain and/or temperature, e.g. through medication,
paralysis or because of chronic illness (e.g. diabetes), we recommend not to
use the seat heating. If the seat heating is used, we recommend to make
regular breaks in your journey when driving long distances, so that the
body can recuperate from the stress of the journey. Please consult your
doctor, who can evaluate your specific condition.
CAUTION
The following instructions should be observed to avoid damage to the seats.
Do not kneel on the seats or otherwise apply concentrated pressure to them.
■
Do not switch on the heating for unoccupied seats.
■
Do not switch on the heating for seats which have objects on them (e.g. a
■
child seat, bag or similar).
Do not switch on the heating for seats which have seat covers or protective
■
covers on them.
Note
If the on-board voltage decreases, the seat heating switches off automatically
» page 149, Automatic shutdown of consumers - vehicle battery discharge
protection.