Multifunction pocket
Read and observe
and
The pocket
» Fig. 102
can be secured to the fastening elements
» Fig. 100
on page 88.
B
The maximum permissible load for the bag attached to the fastening element
is 3 kg.
CAUTION
In vehicles with a variable loading floor, it is not possible to attach the bag to
the fastening elements.
Fastening bar with sliding hook
Fig. 103 Sliding hook onto the mounting bar / removing hook
Fig. 102
Securing the multifunction pock-
et
on page 88 first.
A
Read and observe
A fastening bar is located on both sides of the luggage compartment with two
moveable hooks each, in order to attach small items of luggage, such as bags,
etc.
The maximum permissible load of each of the hooks is 7.5 kg.
Moving the hook
›
Fold up the hook in direction of arrow
45° is reached.
›
Move the hook in the direction of the arrow
fold down the hook as far as the stop in direction of arrow
Removing hooks
The hook can be removed only in the rear region of the attachment bar.
and
›
Fold the hook upwards in direction of arrow
and remove in the direction of arrow
Inserting hook
›
Position the hook on the fastening strip in a vertical position in direction of
arrow
» Fig. 103
5
›
Fold the hook up to the stop away from arrow
Flexible storage compartment
Read and observe
The flexible storage compartment can be installed on the right-hand side of
the boot
» Fig.
104.
The storage compartment is designed for storing small objects with a maxi-
mum total weight of 8 kg.
and
on page 88 first.
» Fig. 103
until an angle of approx.
1
into the desired position and
2
» Fig. 103
4
.
5
and lightly press it on.
until it locks.
4
Fig. 104
Flexible storage compartment
and
on page 88 first.
Transport of cargo
.
3
until it disengages,
89