Installing By Not Connecting This Printer To An Outside Network (Manual) - Canon i-SENSYS LBP6670dn User Manual

Installing by Not Connecting This Printer to an Outside Network
(Manual)
This section describes how to install the system options and MEAP applications without connecting the printer to an outside
network.
Obtaining the License File
Obtain the license file.
License file: Obtain the license file when installing the system options/MEAP applications using the Remote UI.
NOTE
Preparing a license access number certificate
Make sure that the license access number that is included with the package is available.
License access number is not printed on the package of the MEAP application
If the license access number is not printed on the package of the MEAP application you are using, the license file is
issued by the distributor of the MEAP application. You do not need to obtain the license file explained in this section. For
more information, see the manual for each MEAP application.
1
Check the management number you need to obtain the license file.
To obtain the license file, the following management number is required.
License Access Number: Check the license access number certificate.
Device Serial Number: You can check from the control panel.
"[Utility Menu] Menu"
2
Access http://www.canon.com/lms/license/.
3
Follow the instructions on the screen and obtain the license file.
Next, install the system options or the MEAP applications.
Installing the System Options Using the Remote UI
You can install the system options to the printer using the Remote UI.
1
Start the Remote UI, and then log in as Administrator.
"Starting the Remote UI"
Downloaded from ManualsPrinter.com Manuals
04L9-0CR