10
Close the front cover.
If you cannot close the front cover
Make sure that the toner cartridge is installed in the printer properly. Do not try to forcefully close the front cover, as
this may damage the printer.
Check !
Checking if the packing materials are removed
Check that the following packing materials are completely removed.
*
Make sure that all the orange tape is completely removed.
Close the covers after you finish checking.
Next, perform one of the following procedures.
If you want to use the printer with optional accessories installed
Install the optional accessories before installing the printer.
"Installing the Paper
"Installing
"Installing SD
Downloaded from ManualsPrinter.com Manuals
Feeder"
ROM"
Card"
Dispose of the left packing materials according to local
regulations.